Our DEFENDER eventfloor is composed of individual floor tiles measuring 50 cm x 50 cm x 2.8 cm. Each tile in turn has 4 cable ducts that are individually accessible and closable. The floor tiles are securely connected to one another via an interlocking dovetail system. End strips with rounded edges provide a smooth transition from the underlying flooring to the DEFENDER eventfloor. Once the eventfloor is in place, users benefit from being able to lay cable from above at any time with little effort. Cable with a diameter of up to 22 mm can be laid in the floor tiles. The tiles are made of tear- and pressure-resistant polyurethane. The construction design also permits the support of loads of over 6 tons per tile. The DEFENDER eventfloor is thus capable of bearing all types of vehicle, from lifting trolleys to forklifts to low-bed trucks. With an order quantity of 150 m² or more, the colour of the DEFENDER eventfloor can be freely selected from a large range of colours. (Possible additional costs according to agreement.) The lids of our DEFENDER eventfloor are also available in different colour combinations. The ultimate show-stopper: The lids can be made of a transparent material, and the use of light tubes can then transform the cable flooring into an effects floor. The effects achievable via a simple control system are then limited only by the imagination. The flexible individual tiles can compensate for slight irregularities in the underlying flooring. Due to its flexibility, when the eventfloor is in place, it can thus adapt to the underlying surface. Because of its construction, the eventfloor also has insulating properties, and thus provides outstanding protection against cold. Our flooring is therefore also suitable for use e.g. in ice rinks, for events on the ice surface.

Length: 50,0 cm
Width: 50,0 cm
Height: 2,9 cm
Channels: 4 (Ø 2,2 cm)
Weight: 3,5 kg
Load bearing: Approx 6 tons per disc
Operating Temperature range: -30°C to +60°C
Flame Class: B2 (DIN 4102)